English
中文简体
русский
1, aluminium profile wood grain transfer finishing
Huangshan stainless steel film plate aluminium profile wood grain transfer in water lamination film transfer workpiece from the sink, remove the residual film, and then wash with water to remove the floating layer that is not fixed in the product appearance. Note that the water pressure can not be too large, or briefly on the transfer of graphic damage.
2, aluminium profiles wood grain transfer drying aluminium profiles wood grain transfer water phi coating film to remove the moisture of the product appearance, stainless steel laminating plate in order to facilitate the complete drying of the transfer of the ink layer; in order to add fastness to the adhesion, can be used to dry the hair dryer, you can also put the product in the drying box drying. Plastic products can not be too high drying temperature, roughly 50 ~ 60 ℃, the temperature is too high to make the substrate deformation; metal, glass, ceramics and other materials drying temperature can be appropriate progress.
3、Spraying protection paint for aluminium profile wood grain transfer
Aluminium profile wood grain transfer printing in the water laminating film transfer to enhance the graphic layer of resistance to the environment, and stainless steel laminating plate to spray paint on the exterior. Spray paint can be used as solvent-based varnish, natural drying or heat drying after spraying; UV varnish can also be used, the selection of ultraviolet curing drying. In contrast, UV curing is more adaptable to environmental requirements.
Huangshan stainless steel film plate solvent-based varnish needs to be mixed with a supporting hardener, which is a polyurethane resin as the articulating material of the varnish, with the PU hardener; coating thickness can be added by adding the right amount of diluent to improve the viscosity of the varnish to manipulate; pay attention to the drying can not be drying in the oven. For different aluminium profile wood grain transfer material, spray varnish is also divided into three types, namely, suitable for plastic material varnish, suitable for flexible material varnish and suitable for non-absorbent material such as metal, and glass varnish.
